desktop is building I guess, idk, need to start commiting stuff eventually lmao

systems/aarch64-linux/pi5/boot.nix

@@ -0,0 +1,52 @@
+{ pkgs, lib, ... }:
+let
+  kernelBundle = pkgs.linuxAndFirmware.latest;
+in
+{
+  boot = {
+    loader.raspberryPi.firmwarePackage = kernelBundle.raspberrypifw;
+    kernelPackages = kernelBundle.linuxPackages_rpi5;
+  };
+  
+  hardware.raspberry-pi.config = {
+    all = { # [all] conditional filter, https://www.raspberrypi.com/documentation/computers/config_txt.html#conditional-filters
+
+      options = {
+        # https://www.raspberrypi.com/documentation/computers/config_txt.html#enable_uart
+        # in conjunction with `console=serial0,115200` in kernel command line (`cmdline.txt`)
+        # creates a serial console, accessible using GPIOs 14 and 15 (pins 
+        #  8 and 10 on the 40-pin header)
+        enable_uart = {
+          enable = true;
+          value = true;
+        };
+        # https://www.raspberrypi.com/documentation/computers/config_txt.html#uart_2ndstage
+        # enable debug logging to the UART, also automatically enables 
+        # UART logging in `start.elf`
+        uart_2ndstage = {
+          enable = true;
+          value = true;
+        };
+      };
+
+      # Base DTB parameters
+      # https://github.com/raspberrypi/linux/blob/a1d3defcca200077e1e382fe049ca613d16efd2b/arch/arm/boot/dts/overlays/README#L132
+      base-dt-params = {
+
+        # https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#enable-pcie
+        pciex1 = {
+          enable = true;
+          value = "on";
+        };
+        # PCIe Gen 3.0
+        # https://www.raspberrypi.com/documentation/computers/raspberry-pi.html#pcie-gen-3-0
+        pciex1_gen = {
+          enable = true;
+          value = "3";
+        };
+
+      };
+
+    };
+  };
+}